Видео

I could *probably* print this on a Qidi Q1 Pro. 350C nozzle, 120C bed temp, 60C heated chamber. It wouldn't exactly be perfect, but I might actually be able to print this filament on a printer CHEAPER THAN THE FILAMENT ITSELF.

I've heard about the use of laser blue lights, but I can't remember why they are better 😅 Einscans sound pretty dang decent

Whats the accuracy of those printers?

How do you take care of thermal expension? You mentioned with extrusion one would have to caliprate even after cooling down? Whats the logic behind it? Calibrate once at temp and your done?

$14,900.00 USD

is this printer fully sealed? cant have it in a middle of a office printing ASA if not. headache from ASA fumes is a bitch.......ask me how i know lol

I just found out that applying glue stick gave me a case of electrostatic charge that unstick the thin filament from the bed and make it stick to the nozzle.

Its always great to have extra stiffness and low shrinkage in your PP

you didn't address that vide0 you had removed about the p00r quality of the V2... why should people trust you now?

Now prusa has jumped into high temp materials with their new delta printers.

With laser SLS printers now coming in at under $10k, and hobby grade printers like the X1C at just $1500, there is no reason this needs to be $15k. At that market you're in Stratasys territory.

I am curious what changed between the v2 and v3. Looks like it went up to 15k from 12k.

Why copperhead instead of mosquito. Copperhead is a budget option as far as slice is concerned, and this is not a budget machine. What is the reason for corner cutting? The unsupported heatbreak of copperhead is not ideal.

Lidar for flow rate control or accelerometers for input shaping? Every printer has to compete with Bambu. Sure, idex is excellent for support printing, but at $15K I expect to spend the minimum amount of hours dialing in each material.

The printer look realy nice and Josh Hawley do nice job presenting it

My one can print 400x400x450mm. It has liquid cooled stepper motors and hot end. High temp enclosure and nozzle, 360 degree view of the part and all components due to a all glass enclosure and it's more reliable and easy to repair due to the simple cartesian design. Only has a single print head but for what it cost me to build I can build 10 of them for the same price.

I've wanted one of these since the V1 was out!!! V3 is looking 🔥👌

Gone entro to loud and childish

$14.000 😮 the price of a printfarm 😅

Did you say non plannar??? Man i wish i could afford one of these things. Such an absolute beautiful monster of a machine. Killer job to the team behind these

This shouldn't be called 'Which 3D Scanner should you buy', it should be called 'Which of our 3D scanners should you buy'. I'm still none the wiser and judging by all the questions nobody else is either. No prices, no comparisons, what a waste of 12 minutes that was.

Price?

@7:26 I *LOVE* this auto XY calibration.

What is the price range?

maaaaan, the articulated dragons i could make a on this unit!! 😁

Is The Edge of Tech going to be trying one of these out? Curious to see what he'd do with one.

Let me go clear a spot in my hobby house for one of these, and get a camera streaming that spot. ;)

👏Heck yeah Duet 3 MB!

This thing is amazing! One day, I will be able to afford one haha And don't take this as a knock like this machine is too expensive. I'm fully aware of the potential things this can make and what kind of profits it can bring in I'm just not in a position to even come close to affording it right now. But I have a goal now ;)

Does the glue stick or your product work with textured plates, or will it mess those up my gunking up the texture?

Amazing! Any chance you guys would make a consumer printer with a 90C chamber? That would be awesome.

This Printer is an absolute beast of a printer! Nice work on the new version, and thank you for letting me release a video on it as well!

Wish it was in my price range. Know you guys focus on commercial/prosumer but i imagine youd kill a consumer printer

Too much talking. No exact numbers. Chatgpt content is better than humans now.

All the headaches and cost of PEEK with all the headaches and cost of 3D printing

in the future it would be great if you could put your audio through a low-pass filter because I can hear a bunch of high frequency digital whine in this video, too much to watch without an equalizer

Is it possible to make the entire part in high resolution 0.01mm in one pass? Or should the scan be split into sections and then stitched together? How long did it take to scan this part at precision resolution?

Hey, I’m really interesting on buying one for my new proyecto is there any way to write you directly ?, so I can explain you about the proyecto.

@VisionMiner I was Sr. Lab Tech at Arkema for 4+ years and was HEAVILY involved in testing Kepstan (PEKK). Anyway, can I get a trial spool for my Bamboo Lab X1C?

Oi obrigado pelas dicas . Qual matéria prima impressa em 3d é mais resistente a abrasão? Obrigado

Can you cool Ultim slowly like when you weld cast iron in heated sand that's the same temperature as the part when it's finished? It would give a very very slow and gradual cool down over 24-48 hrs.

Hey Rob. Just a thought, but are you aware of anyone adding an ULTRASONIC transducer to an FDM hot end for to radically improve layer adhesion and print quality?

Thank you

....That hot glue tip is SO GOOD!

Hi, I need your thoughts before making a purchase. I'm currently looking at the Artec Space Spider and the FreeScan Combo (possibly the FreeScan Trio). I will mainly use this scanner for scanning hands and feet, including nails. Eventually, I will measure finger and nail sizes as well. Which scanner do you think would be more appropriate for my needs? The Accuracy is really important as well.

Tell me you are a Sinerit schill with out telling me you’re a schill. Very biased review in tone and content. Also needs affiliate disclaimer. 👎🏻

Very disappointed to see that the chamber is still stuck at 90C like the funmat. Can’t by simply for that reason

Prices? The prices are ridiculous...

Is there any chance of the glass plate breaking when removing the part from the build plate after the build is over? 

Is there any chance of the glass plate breaking when removing the part from the build plate after the build is over?